SmartLynk is a compact, portable/on-camera, two-channel mixer and monitoring device, giving you the results of a professional audio production rig at a fraction of the price. The perfect companion to the SmartMyk microphone and the MyMyk Camera Audio iPhone app, SmartLynk allows you to monitor your sound input prior to and during recording; block unwanted AGC noise from the camera by overriding the camera's built-in Automatic Gain Control (AGC); or record external audio without needing to be attached to your DSLR or video camera. What’s more, it has two microphone inputs so you can capture multiple audio channels at once.
Input impedance per channel: 47kΩ
Output impedance – Mixer output to camera: 200Ω
Output impedance – Mixer output to smartphone: 100Ω
Input signal maximum per channel: 4mV
Mixer gain: 1V/V
Mixer frequency response: 20Hz to 20kHz, ±3dB
Mixer noise RTI: 70nV/sqrtHz
Signal polarity: Non Inverted
Blocker frequency: HF in-audible
Blocker output level: 2mV
Blocker enable/disable: Slide switch
Blocker output: Tip of TRS
Output jack to camera, signal and blocker signal: 3.5mm TRS
Headphone amplifier output power per channel: 250mW into 8Ω, 85mW into 32Ω
Headphone channel frequency response: 20Hz to 20kHz, ±3dB
Headphone mix signal level control: Volume pot
Smart output jack to smartphone: 3.5mm TRRS. SmartLynk will disable smartphones’ internal microphone via auto detect function.
Headphone source select switch: Smartphone or mixer
Power: 2 X 1.5 v AAA alkaline cells
Current consumption nominal: <10mA
Battery Life: >40hours
Power switch: Integrated into the mix mode switch
Mixer controls: Left & right level pots, fade to full adjust
Indicator: Power on/off
Fully designed in Australia. Electronics Manufactured in Australia.
Copyright 2012 My Myk Limited. All rights reserved.
Unfortunately, we only have 1 piece(s) currently available. We have adjusted your order accordingly.