Equipped with the same Dante user switch capabilities as the ATND971 boundary mic, the ATND8677 desk stand allows Dante technology to be used with any phantom-powered condenser gooseneck microphone with a 3-pin XLRM-type output. The desk stand is designed for surface-mount applications such as high-quality sound reinforcement, conferencing, distance learning and other demanding sound pickup applications.
The sturdy metal base features a 3-pin XLRF-type input and Dante network output, enabling direct connection to the network via Ethernet cable. The desk stand’s touch-sensitive capacitive-type user switch with integral red/green LED status indicator permits advanced local and remote control. In Local mode, the switch mutes and unmutes the microphone: It can be set to toggle between live and muted audio (toggle on/off), to permit live audio only while the switch is pressed (press to talk), or to mute the audio while the switch is pressed (press to mute). In Remote mode, the switch can be used to trigger functions on compatible Dante-enabled devices, such as a video camera’s pan/tilt or a room’s lighting preset.
An integral 80 Hz low-cut UniSteep® filter provides easy switching from a flat frequency response to a low-end roll-off, while a three-position input gain level selector (+30 dB, +40 dB, +50 dB) permits trim adjustment to accommodate louder and softer voices. The desk stand also provides 12V DC phantom power, which can be switched off and on.
FREQUENCY RESPONSE 20-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
IMPEDANCE 1.4 kΩ
MAXIMUM INPUT SOUND LEVEL -10 dBu @ +30 dB gain
-20 dBu @ +40 dB gain
-30 dBu @ +50 dB gain
SIGNAL-TO-NOISE RATIO 68 dB, 1 kHz at 1 Pa
POWER REQUIREMENTS PoE IEEE802.3af standard (Power consumption 1.5W)
SWITCHES Local Mode: Touch-sensitive capacitive-type user switch function: toggle (mute on power up), toggle (talk on power up), momentary on, momentary off;
Low-cut filter: flat, roll-off;
Gain: +30 dB, +40 dB, +50 dB;
Phantom power: 12V DC, off
Remote Mode: Low-cut and Gain via third-party software*
WEIGHT (MICROPHONE) 770 g (27.2 oz)
DIMENSIONS 133.0 mm (5.24") maximum length,
93.8 mm (3.69") maximum width,
46.2 mm (1.82") maximum height
OUTPUT CONNECTOR Physical level: standard Ethernet
Input Connector: 3-pin XLRF-type
Dante Network Specifications
Connector: single RJ45
Cable quality: Shielded CAT5 or CAT6 recommended
Transmission speed: 100 Mbps
Joining-plate kit for 4000 Series and 1400 Series receivers. Allows mounting two receivers in...
Solid, metal table stand with soft rubberised surround for good suppression of structure-borne noise. Provides...
he Sennheiser MZTX 31PTT is a Microphone Table Stand with XLR and Push-Talk Button. The mount operates...
Subscribe to our newsletter and always be the first to hear about what is happening.
|Melbourne||(03) 9672 2222|
|Sydney||(02) 8004 7945|
|Brisbane||(07) 3103 1429|
|Perth||(08) 6102 6382|
|Adelaide||(08) 7200 3773|
|Darwin||(08) 8911 1262|
|Canberra||(02) 6176 0125|
|Hobart||(03) 6107 9442|
|Auckland||(09) 887 0479|
© 2017 michaels camera video digital.