Add tally to your ATEM switcher with Blackmagic Design's GPI and Tally Interface! With 8 contact closure tally outputs, you can send a tally signal to your cameras, replay machines and monitors so everyone knows which camera is 'on-air'! If you need more tally outputs, simply connect multiple GPI and Tally Interfaces together because it connects via Ethernet to your ATEM production switcher.
25 pin D-type connector providing 8 opto isolated inputs and 8 relay contact closure outputs.
1 x USB 2.0 high speed interface for configuration and firmware updates.
Optical isolators triggered by connection to ground.
Max 5V at 14mA.
Mechanical relay contact closure to ground. Max 30V at 1A.
10/100 BaseT with loop through for connecting to other ethernet enabled equipment.
Configured via ATEM Switcher Utility.
Firmware built into software driver. Loaded at system startup or via updater software.
Mac OS X 10.9 Mavericks,
Mac OS X 10.10 Yosemite or later.
Windows 7 or Windows 8.
12V power supply included with international socket adaptors for all countries.
0° to 40° C (32° to 104° F)
-20 - 60 degrees celsius
Up to 95%
GPI and Tally Interface
12 Months Limited Manufacturer's Warranty.
Breakout Audio cable for Blackmagic ATEM production switchers.
The MD 421 II is one of the best known microphones in the world. Its...
When the software control panel is too limited, the ATEM 1 M/E Broadcast Panel...
Subscribe to our newsletter and always be the first to hear about what is happening.
|Melbourne||(03) 9672 2222|
|Sydney||(02) 8004 7945|
|Brisbane||(07) 3103 1429|
|Perth||(08) 6444 7811|
|Adelaide||(08) 8470 8977|
|Darwin||(08) 8911 1262|
|Canberra||(02) 6176 0125|
|Hobart||(03) 6107 9442|
|Auckland||(09) 887 0479|
© 2018 michaels camera video digital.