The Remote Controller for Ronin-M from DJI is a dedicated 2.4 GHz handheld transmitter that comes pre-configured for Ronin-M gimbal operation. With the transmitter, one operator can carry the gimbal while a second operates controls the gimbal pan, tilt, and roll remotely. This enables much more precise camera movements than is possible with only a single operator.
This is for use with the Ronin-M only. It is not compatible with the Ronin.
Please make sure that the remote control is sufficiently charged before use. The remote will automatically turn off if the battery voltage gets too low.
Charge the internal battery using the Micro-USB cable included with the Ronin-M. Using the incorrect type of charging cable may cause damage.
Turn off the remote control before charging. The power LED indicator will glow solid green when the battery is fully charged.
When using the remote control, ensure that the antenna is at least 7.9" away from any person.
The white 9-inch 9450 Self-Tightening Propellers for the DJI Phantom is a set of...
The DJI Battery (2 PIN) to DC Power Cable is used to connect a DJI...
Intelligent Flight Battery (3,830mAh/11.4V) specially designed for the Mavic. Built-in sensors and bright LEDs tell...
Subscribe to our newsletter and always be the first to hear about what is happening.
|Melbourne||(03) 9672 2222|
|Sydney||(02) 8004 7945|
|Brisbane||(07) 3103 1429|
|Perth||(08) 6444 7811|
|Adelaide||(08) 8470 8977|
|Darwin||(08) 8911 1262|
|Canberra||(02) 6176 0125|
|Hobart||(03) 6107 9442|
|Auckland||(09) 887 0479|
© 2019 michaels camera video digital.