ES905/CL Cardioid Condenser Rigid-Pipe Microphone

Continue Shopping or Checkout


Enquire about our finance options:


Availability: Ordered In Upon Purchase


Category: Pro-Audio-Installation-Sound-Gooseneck


Book a Demonstration
Request Commercial Quantities
Request a Price Match

 

The ES905CL is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications. Its rigid-pipe design with ball-in-socket base permits flexible positioning, while its durable metal base mounts to a table, desk or podium with included hardware. The attached wire mesh windscreen with internal pop protection effectively reduces noise from P-pops, wind, and ventilation air currents. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations. The ES905CL also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone’s low-profile element provides a uniform cardioid polar pattern with a 120º acceptance angle. Power module included.

Designed for high-quality sound reinforcement, professional recording and broadcasting
Low-profile element provides uniform cardioid polar pattern with 120º acceptance angle
Rigid-pipe design with ball-in-socket base permits flexible positioning
Sturdy metal base mounts to table, desk or podium with included hardware
Superior off-axis rejection for maximum gain before feedback
Requires 11V to 52V DC phantom power
UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
Integral UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
RoHS compliant 

Element
Fixed-charge back plate permanently polarized condenser
Polar Pattern
Cardioid
Frequency Response
60-20,000 Hz
Low Frequency Roll-Off
80 Hz, 18 dB/octave
Open Circuit Sensitivity
–38 dB (12.5 mV) re 1V at 1 Pa
Impedance
250 ohms
Maximum Input Sound Level
138 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range (Typical)
111 dB, 1 kHz at Max SPL
Signal-To-Noise Ratio
67 dB, 1 kHz at 1 Pa
Phantom Power Requirements
11-52V DC, 2 mA typical
Weight (Microphone)
330 g (11.6 oz)
Weight (Power Module)
81 g (2.9 oz)
Dimensions (Microphone)
523.4 mm (20.61″) long 
24.6 mm (0.97″) head diameter
Dimensions (Power Module)
92.9 mm (3.66″) long, 
18.9 mm (0.74″) diameter
Output Connector (Power Module)
Integral 3-pin XLRM-type
Cable
2.9 m (9.5′) long, (permanently attached to microphone) 3.2 mm (0.13″) diameter, 2-conductor, shielded cable terminated with TA3F-type connector
Optional Interchangeable Elements
ESE-H hypercardioid (100°); 
ESE-O omnidirectional (360°)
Accessories Furnished
AT8538 power module; (3) #8 x 1″ black oxide wood screws for microphone mount 

 

Related Items