The Induro Mighty Mitch is the most versatile Mitchell hi-hat available. Each leg has three independent positions allowing you to quickly go from hi-hat to low-hat position for low angle shots, fitting into tight spaces or handling uneven terrain. You can also extend each leg using the oversized twist leg locks. Each lower leg section has a scale to set each leg at the same height.
The Mitchell base is made out of a solid block of aluminum and takes more than 24 hours to machine. The base has three key ways to quickly mount the head, a 2-3/4" hole, built-in bubble level as well as three 3/8"-16 and 1/4"-20 threaded accessory mounts.
Supporting a 330 lb payload, the Mighty Mitch can handle its share of today’s cinema cameras and lenses. Four tie-down handles are included for attaching ratchet straps. The reinforced pivoting ovoid feet are attached via the 5/8" thread and also have holes in them should the hi-hat need to be mounted to a board.
Maximum Load 330 lb (150 kg)
Max Height 13 in (33 cm)
Folded Length 10 in (25.5 cm)
Weight 6.5 lbs (2.96 kg)
The 3 section MT294A3 tripod is the larger tripod of the 290 family that combines...
The Bogen/Manfrotto 190XDB Tripod Legs builds on the success of the 3001 series, but has...
The Manfrotto 190XB Tripod Legs builds on the success of the 3001 series, and has...
Subscribe to our newsletter and always be the first to hear about what is happening.
|Melbourne||(03) 9672 2222|
|Sydney||(02) 8004 7945|
|Brisbane||(07) 3103 1429|
|Perth||(08) 6102 6382|
|Adelaide||(08) 7200 3773|
|Darwin||(08) 8911 1262|
|Canberra||(02) 6176 0125|
|Hobart||(03) 6107 9442|
|Auckland||(09) 887 0479|
© 2017 michaels camera video digital.