The Litepanels Low-profile series is a reconfiguration of the Spot, Super-Spot and Flood 1X1s meant to be mounted parallel (horizontally) with the ceiling or wall. Because the individual lenses of the LED array are tilted at 40 degrees off-axis, you don't have to tilt the fixture, making it possible to mount it with only three inches of clearance from the surface. It's ideal for small rooms where floor space or headroom is tight.
This Litepanels 1X1 Low-Profile LED Tungsten Flood Light draws just 40 watts and is driven by the included 100-240 Volt power supply as well as a variety of DC battery sources, such as the Litepanels Backpack PowerCell (1.75 hours power). The 1X1's LEDs have a 50,000 hour lamp life, making it effectively maintenance-free.
Among the features that professionals have come to appreciate in the series are the ballast-free design, 0-100% dimming and virtually heat-free operation. Options include DMX modules, slide-in conversion and diffusion filters and a wired remote dimmer (purchased separately).
Note:10' XLR Power Supply Cable not included
The fixture mounts nearly flush with the ceiling or wall with only three inches of clearance from the surface. Because the individual LEDs in the 1X1 are tilted at 40 degrees, no tilting of the fixture is required, allowing you to utilize room space that would have been claimed by light stands or overhead brackets.
Control knob on rear of unit provides 0-100% dimming, with no color shift.
An optional, remote dimming control is also available.
Soft, Concentrated Quality of Light
The "beam" of the 1x1' measures approximately 50 degrees, making it making it possible to fully illuminate subjects at relatively close distances.
Color Conversion and Diffusion slide-in filters are available separately.
Multi-Voltage Power Supply
Power supply operates with 100-240 AC voltage (plug adapters available separately).
Uses a wide variety of battery power sources (18-28VDC) including the Litepanels optional Backpack PowerCell.
Even at only 3" from the mounted surface, there is no risk of damage from this virtually heat-free fixture.
|Rating||500W (compared with quartz-halogen)|
|Operating Voltage||100-240V AC, as supplied
18-28V DC with optional battery sources
|Cable||~6', 120V AC plug
10' XLR Power Supply cable (optional)
|Mount||Yoke with Baby (5/8") receptor|
|Dimensions||12 x 12 x 1.75" (30.5 x 30.5 x 4.3 cm)|
|Weight||3 lb (1.4 kg)|
Dimmer Knob Replacement for Litepanels Micro
The Litepanels Dimmer Knob Replacement for MicroPro Hybrid LED Light lets you conveniently adjust the...
The Litepanels PA-C is a 12 VDC power cord for the LitePanels Mini LED light...
Subscribe to our newsletter and always be the first to hear about what is happening.
|Melbourne||(03) 9672 2222|
|Sydney||(02) 8004 7945|
|Brisbane||(07) 3103 1429|
|Perth||(08) 6102 6382|
|Adelaide||(08) 7200 3773|
|Darwin||(08) 8911 1262|
|Canberra||(02) 6176 0125|
|Hobart||(03) 6107 9442|
|Auckland||(09) 887 0479|
© 2017 michaels camera video digital.