For connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Canon E3 remote terminal or sub miniphone (3/32" or 2.5 mm).
Cable lengths: 3' (91.5 cm) and 1' (30 cm)
From: 1/8" (3.5 mm) stereo miniphone
To: Canon E3 remote shutter release terminal or sub miniphone
• Plus III
• MultiMAX with ACC port
• For the Plus II, older MultiMAX, or other PocketWizard radios, we recommend using the CM-E3-P or CM-E3.
Description: This is a special remote shutter release cable called a Pre-Trigger Cable. A Pre-Trigger cable controls both the half-press and full-press function of your remote camera’s shutter release. When a camera is “pre-triggered”, it is like holding your camera’s shutter release button in the half-pressed or metering/focusing position.
This –ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions.
Added bonus: All CM-E3-ACC cables shipped into the market starting July/August 2013 include a MSMM Adapter (stereo to mono miniphone) which converts a CM-E3-ACC cable to a standard CM-E3 miniphone cable. This change coincides with the introduction of our new retail packaging. All cables are now packaged in a environmental friendly cardboard box with rececyled white labels showing both ends of the cable as well as compatibility list. This replaces our old packaging of a zipped bag packaging.
A Standard Cable (CM-E3) works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only. (Using a CM-E3-ACC cable with a MSMM Adapter will provide the same function as a CM-E3 cable.)
A Pre-Release or Pre-Trigger (–P) Cable (CM-E3-P) works with most PocketWizard radios. This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely. (Using a CM-E3-ACC cable with a PTMM Adapter will provide the same function as a CM-E3-P cable.)
Compatible with the following radios:
PlusX: Use this cable with the PlusX to trigger the camera.
Plus III: Use this cable with the Plus III’s exclusive 2-stage trigger to wake-up or focus your remote camera just like using the camera’s shutter release button.
FlexTT5: This cable is required for auto-relay mode with E-TTL, or other remote triggering with the FlexTT5. Learn more here. You can use a CM-E3–P cable or CM-E3 Standard Cable with a FlexTT5, but your remote camera will not be able to relay an E-TTL signal to Speedlites. The FlexTT5 does not support the 2-stage trigger function.
MultiMAX with –ACC port: Enable a remote zone with your hand-held MultiMAX, and your remote MultiMAX will wake up its remote camera with this cable. As long as the zone is turned on, the remote camera will stay awake and respond more quickly and consistently, but also consume the camera's batteries much more quickly. When the remote zone is disabled, the camera will enter its normal sleep modes. The MultiMAX does not support the 2-stage trigger function.
Please see our PocketWizard Wiki for more details.
Compatible with cameras using Canon's E3 remote terminal or sub-miniphone connector including:
Canon Rebel Series
Canon Canon-Film Hasselblad
Digital Rebel/300D 60D EOS Rebel Ti
Digital Rebel XT/350D 70D
EOS Rebel T2
Digital Rebel XTi/400D SL1
EOS Rebel 2000
EOS Rebel XS/1000D EOS Rebel G & G II
EOS Rebel XSi/450D Bronica EOS Rebel X
EOS Rebel T1i/500D
ETR motor drive EOS Rebel XS H2F
EOS Rebel T2i/550D SQA series EOS Rebel XSi
EOS Rebel T3/1100D EOS IX Lite H3D II
EOS Rebel T3i/600D
EOS Elan II & IIE
EOS Rebel T4i/650D 645 series
EOS Elan 7 &7E
EOS Rebel T5/1200D
EOS Elan 7N & 7NE
EOS Rebel T5i/700D
The PocketWizard AC7 RF Shield for FlexTT5 solves the problem of limited performance of the...
Locking PC Sync Cable For connecting to a locking/non-locking PC terminal. Cable length: 5' (1.5...
For connecting a PocketWizard radio (including FlexTT5) to any flash equipped with a PC...
Subscribe to our newsletter and always be the first to hear about what is happening.
|Melbourne||(03) 9672 2222|
|Sydney||(02) 8004 7945|
|Brisbane||(07) 3103 1429|
|Perth||(08) 6102 6382|
|Adelaide||(08) 7200 3773|
|Darwin||(08) 8911 1262|
|Canberra||(02) 6176 0125|
|Hobart||(03) 6107 9442|
|Auckland||(09) 887 0479|
© 2017 michaels camera video digital.