For connecting a Plus II or MultiMAX with no ACC port to a Canon E3 or sub miniphone (3/32" or 2.5 mm) remote shutter release terminal.
Cable length: 3' (91.5 cm)
From: 1/8" (3.5 mm) mono miniphone
To: Canon E3 remote terminal
· Plus II
· MultiMAX with no ACC port
· For PlusX, Plus III, MultiMAX with ACC port, or FlexTT5 radios, we recommend using the CM-E3-ACC.
Description: This cable connects your radio to your camera’s remote terminal to enable remote camera triggering. This standard cable works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only.
A Pre-Release or Pre-Trigger (–P) CM-E3-P cable works with most PocketWizard radios. This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely. (Using a CM-E3-ACC cable with a PTMM Adapter will provide the same function as a CM-E3-P cable.)
A -ACC (CM-E3-ACC) cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions, as well as relay E-TTL signals to compatible flashes when using FlexTT5s. (Using a CM-E3-ACC cable with a MSMM Adapter will provide the same function as a CM-E3 cable.)
All cables are now packaged in a environmental friendly cardboard box with rececyled white labels showing both ends of the cable as well as compatibility list. This replaces our old packaging of a zipped bag packaging.
Compatible with the following radios:
Plus II: Use this cable to remotely fire your camera.
Plus III: This cable can remotely fire your camera but it has no half-press control. Use a CM-E3-ACC cable for best results.
FlexTT5: This cable can be used to remotely fire your camera, like a CM-E3–P cable or CM-E3 Standard Cable with a FlexTT5, but your remote camera will not be able to relay an E-TTL signal to Speedlites. Use a CM-E3–ACC cable for best results. Learn more here
MultiMAX with no –ACC port: Use this cable to remotely fire your camera.
MultiMAX with –ACC port: This cable can remotely fire your camera but it has no half-press control. Use a CM-E3-ACC cable for best results
Please see our PocketWizard Wiki for more details
Compatible with cameras using Canon's E3 remote terminal or sub-miniphone connector including:
Canon Rebel Series Canon
Digital Rebel/300D 60D
EOS Rebel Ti
Digital Rebel XT/350D
70D EOS Rebel T2
Digital Rebel XTi/400D
SL1 EOS Rebel 2000
EOS Rebel XS/1000D EOS Rebel G & G II
EOS Rebel XSi/450D EOS Rebel X
EOS Rebel T1i/500D
EOS Rebel XS
EOS Rebel T2i/550D EOS Rebel XSi
EOS Rebel T3/1100D
EOS IX Lite
EOS Rebel T3i/600D
EOS Elan II & IIE
EOS Rebel T4i/650D
EOS Elan 7 &7E
EOS Rebel T5/1200D
EOS Elan 7N & 7NE
EOS Rebel T5i/700D
Not for use with Hasselblad H series, Contax 645 and N series, and Bronica SQA and ETR series.
For remotely triggering a flash equipped with a 1/8" (3.5 mm) mono miniphone sync...
The PocketWizard AC7 RF Shield for FlexTT5 solves the problem of limited performance of the...
Locking PC Sync Cable For connecting to a locking/non-locking PC terminal. Cable length: 5' (1.5...
Subscribe to our newsletter and always be the first to hear about what is happening.
|Melbourne||(03) 9672 2222|
|Sydney||(02) 8004 7945|
|Brisbane||(07) 3103 1429|
|Perth||(08) 6102 6382|
|Adelaide||(08) 7200 3773|
|Darwin||(08) 8911 1262|
|Canberra||(02) 6176 0125|
|Hobart||(03) 6107 9442|
|Auckland||(09) 887 0479|
© 2016 michaels camera video digital.