For remotely triggering the electronic shutter release of cameras with a Nikon 10-pin Remote Terminal.
Cable length: 3' (91.5 cm)
From Nikon 10-pin Remote Terminal
To 1/8" (3.5 mm) Stereo Miniphone
For MultiMAX with ACC port. This cable will NOT work with the Plus II. Works with the Nikon D200 or D100 w/ MB-D100 but will not work with the D700. Use the N90M-ACC-ND cable for that camera.
-ACC Cables are a special kind of Pre-Trigger cable for use with the new FlexTT5 or the latest MultiMAX. Toggle Pre-Trigger on and off remotely with the MultiMAX. Required for remote camera triggering with a FlexTT5 if using E-TTL functions. NOTE: An older mono motor drive cable and/or pre-release cable can be used instead of an -ACC cable with a FlexTT5 but you will not have E-TTL capability.
International Catalog Number: N90M-ACC
US Catalog Number: 802-452
Compatible with cameras using Nikon 10-pin Remote Terminal including:
||D2Xs||DCS Pro SLR/n
||D2H||DCS Pro 14n
||S3 Pro UVIR|
|D2X||D100 w/ MB-D100||
The PocketWizard AC7 RF Shield for FlexTT5 solves the problem of limited performance of the...
Locking PC Sync Cable For connecting to a locking/non-locking PC terminal. Cable length: 5' (1.5...
When you add the PocketWizard AC3 ZoneController for Nikon to your on-camera MiniTT1...
Subscribe to our newsletter and always be the first to hear about what is happening.
|Melbourne||(03) 9672 2222|
|Sydney||(02) 8004 7945|
|Brisbane||(07) 3103 1429|
|Perth||(08) 6102 6382|
|Adelaide||(08) 7200 3773|
|Darwin||(08) 8911 1262|
|Canberra||(02) 6176 0125|
|Hobart||(03) 6107 9442|
|Auckland||(09) 887 0479|
© 2016 michaels camera video digital.