For connecting a Plus II or MultiMAX with no ACC port to a Nikon 10-pin remote shutter release terminal, through a pre-trigger switch
Cable length: 3' (91.5 cm)
From 1/8" (3.5 mm) mono miniphone
Via pre-trigger Switch
To Nikin 10-pin remote shutter release terminal
· Plus II
· MultiMAX with no ACC port
· Use the N90M-ACC for the PlusX, Plus III, MultiMAX with ACC port, or FlexTT5 radios
Description: This cable contains a pre-trigger switch. When enabled, the camera behaves as if the camera's shutter release button were held half-pressed continuously. This makes the camera respond more quickly and consistently, but also consumes the camera's batteries much more quickly. When disabled, this cable functions identically to the N90M3.
This –P cable works with most PocketWizard radios. This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely.
A standard cable works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only.
A –ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions, as well as relay E-TTL signals to compatible flashes when using FlexTT5s.
Compatible with the following radios:
Plus II: Use this cable to remotely fire your camera.
Plus III : This cable can remotely fire your camera and control half-press function at the camera’s position. Use a –ACC cable for best results and to have half-press capability from the transmitting radio.
MultiMAX with no –ACC port: Use this cable to remotely fire your camera and control half-press function at the camera’s position.
MultiMAX with –ACC port: This cable can remotely fire your camera but cannot wake up the camera in a remote zone. Use a –ACC cable for best results
FlexTT5: This cable can remotely fire your camera and control half-press function at the camera’s position, but your remote camera will not be able to relay an E-TTL signal to Speedlites. Use a –ACC cable for best results. Learn more here
Please see our PocketWizard Wiki for more details.
Compatible with cameras using Nikon's 10-pin remote terminal including:
DCS Pro SLR/n
DCS Pro 14n S3 Pro UV IS
D3X DCS 760
D4s DCS 660
D100 w/ MB-D100 * DCS 660M
D200 * DCS 620
D1X D300 DCS 620x
* If you have a D200 or a D100 with MB-D100, you can use either the N10-ACC-D200 (formerly the N90M-ACC) or N10-ACC (formerly the N90M-ACC-ND) with the PTMM Adapter.
For connecting a PocketWizard radio (including FlexTT5) to any flash equipped with a PC terminal...
The AC3 ZoneController is the gem of the ControlTL product line. Add it to your...
PocketWizard’s new firmware platform taps into the full potential of your camera and flash...
Subscribe to our newsletter and always be the first to hear about what is happening.
|Melbourne||(03) 9672 2222|
© 2019 michaels camera video digital.