The Rode NT5 is a cardioid condenser microphone offering a full frequency response and low-noise output circuitry. Designed for general instrument recording and sound reinforcement.
The cardioid polar pattern effectively minimizes audio at the off-axis sections, reducing noise caused by, leakage, monitors, additional instruments etc. The NT5 offers a frequency response of 20Hz to 20kHz allowing the microphones to be used in a wide variety of applications such as drum over-head miking, stereo capturing of instruments, vocal capturing etc. The NT5 is powered via +48, +24 volt phantom power. The package is complete and includes dual wind screens and stand mounts in a durable road case.
|Transducer||Externally Polarized 1/2" (13mm) Pressure Gradient Condensers|
|Frequency Response||20Hz - 20kHz|
|Dynamic Range (Typical)||> 128dB|
|Maximum Input Sound Level||143dB, (@ 1% THD into 1k)|
|Power Requirements||4mA, P48 (38v-52v) 2mA, P24 (20v-26v) 2.8mA, P12 (10.8v-13.2v)
Note: The microphones operate in accordance with the above specifications to a minimum of 18v. (It will operate with some performance degradation below 18v.)
|Output Impedance||200 Ohms (Each)|
|Output Connectors||XLR-3M Type|
|Low Frequency Roll-Off||None|
|Dimensions||4.72 x 0.8" (118 x 20mm) LxDdiameter|
|Weight||3.53 oz. (100g)|
The RØDE iClamp is a heavy-duty clamp designed to provide additional support for your...
The iClamp6 is an additional rubber clamp that allows the i-XY stereo microphone (lightning...
The VXLR from Rode Microphones is an adapter that converts a 3.5mm mono...
Subscribe to our newsletter and always be the first to hear about what is happening.
|Melbourne||(03) 9672 2222|
|Sydney||(02) 8004 7945|
|Brisbane||(07) 3103 1429|
|Perth||(08) 6102 6382|
|Adelaide||(08) 7200 3773|
|Darwin||(08) 8911 1262|
|Canberra||(02) 6176 0125|
|Hobart||(03) 6107 9442|
|Auckland||(09) 887 0479|
© 2016 michaels camera video digital.