The Rode NT6 is a professional general purpose condenser microphone that exhibits the convenience of flexible placement, making it a strong candidate for instrument capturing in recording and sound reinforcement applications. Capitalizing on the success of the renowned NT5, the engineers at Rode implement it's cardioid capsule into the miniature design of the NT6.
The NT6 features a detached microphone head (capsule) and body (output stage). A 10-foot (3 meter) Kevlar reinforced cable attaches the two components and enables flexible microphone mounting and placement. The NT6 features a cardioid polar pattern which effectively minimizes noise due to off-axis ambient audio and feedback. A -10dB Pad switch provides added head room, allowing excessively loud signals - such as brass and percussion - to be captured without noise or distortion. A low frequency roll-off switch eliminates low frequency noise and rumble below 80Hz.
|Transducer||Externally Polarized 1/2" (13mm) Pressure Gradient Condenser|
|Frequency Response||40Hz to 20kHz Selectable HPF
@ 80Hz/12dB/octave (see graphs over)
|Dynamic Range (Typical)||119dB (per IEC651, IEC268-15)|
|Signal-to-Noise Ratio||75dB (1kHz rel 1Pa; per IEC651, IEC268-15)|
|Maximum Input Sound Level||138dB (@ 1% THD into 1k ohms)
148dB (@ 1% THD into 1k ohms) - pad at maximum
|Power Requirements||48 Volts (P48)|
|Output Impedance||200 ohms|
|Output Connectors||3 pin XLR, balanced output|
|Low Frequency Roll-Off||80Hz Low Frequency Roll-Off|
Capsule: 4.66 x .78" (118.4 x 20mm) (Length x Diameter)
Main Body: 3.48 x 2.52 x .78" (88.5 x 64 x 20mm) (L x H x D)
Kevlar Cable (Between Capsule and Body): 10-Feet (3 meters)
|Weight||386g (12.41 oz)|
The RØDE iClamp is a heavy-duty clamp designed to provide additional support for your...
The iClamp6 is an additional rubber clamp that allows the i-XY stereo microphone (lightning...
The VXLR from Rode Microphones is an adapter that converts a 3.5mm mono mini...
Subscribe to our newsletter and always be the first to hear about what is happening.
|Melbourne||(03) 9672 2222|
|Sydney||(02) 8004 7945|
|Brisbane||(07) 3103 1429|
|Perth||(08) 6102 6382|
|Adelaide||(08) 7200 3773|
|Darwin||(08) 8911 1262|
|Canberra||(02) 6176 0125|
|Hobart||(03) 6107 9442|
|Auckland||(09) 887 0479|
© 2017 michaels camera video digital.