Sennheiser Loudspeaker Self Powered

Continue Shopping or Checkout

Enquire about our finance options:

Availability: Ordered In Upon Purchase

Category: Pro-Audio-Live-Sound-Portable-PA-Systems, sennheiser

Book a Demonstration
Request Commercial Quantities
Request a Price Match

Product Highlights

  • 120W Peak Output, 55W Continuous
  • 3 Slots for Wireless Receivers
  • Battery Powered for Cable-Free Operation
  • Bluetooth Streaming Audio
  • iPad App for System Control
  • Scalable From 2 to 20 Units
  • WLAN Networkable for System Control
  • USB Port for Playback and Recording
  • Linkable for Cabled Connection







The LSP 500 Pro Self-Powered Wireless PA System from Sennheiser is a rechargeable battery powered wireless PA system capable of up to 120-watts of peak output and 55-watts of continuous output. It is scalable to up to 20 units and designed to be controlled by the LSP 500 iPad app via its integrated WLAN connection and an optional wireless router. The unit has 3 rear-panel slots that allow you to integrate up to 3 wireless receivers into the speaker. In addition to the wireless slots, the LSP 500 is Bluetooth enabled and can playback audio from any Bluetooth compatible device. The rear-panel USB 2.0 port provides another input for your digital audio, allowing playback from tracks stored on a flash drive. You can also record the audio routed through the LSP 500 system to a flash drive via USB. The unit also features XLR in and output links for integrating a subwoofer into the system, or connecting multiple units if you do not have access to a wireless router.

Designed for Fast Setups
LSP 500 PRO has no cords for a quick setup. Sound presets and EQ help aide in quick audio set-up, input mixing and output recording.
iPad Control
Once the LSP 500 PRO is in service, you control the complete system with the swipe of a finger. Input sources, sound mixing, playlist management and live recording are all done via iPad. You can freely move around the venue at any time while keeping the performance under control
LSP 500 PRO is completely scalable even to sizable audiences and large events, whether your job needs 2 or 20 speakers
Hot-Swappable Battery Power
The LSP 500 PRO is dual battery powered. In case battery power runs low, you will be alarmed via iPad. Battery replacement is convenient and done by hot-swapping, even during live operation
Wireless Slot 1: 
1/2 19" (482 mm) 1 U for wireless receiver
DC Connector: hollow jack plug
Input Connector: 1/4" (6.35 mm) jack plug
Input Level: 12 dBu, maximum
Input Impedance: 10 kΩ
Output Connector: 1x XLR-3M
Output Level: 16 dBu maximum, nominal 4 dBu
Data Connector: RJ 45
Sensitivity: Adjustable
Sound Presets: Speech, Vocal, Flat

Slot 2:
1/2 19" (482 mm) 1 U for wireless receiver
Sensitivity: Adjustable
Sound Presets: Speech, Vocal, Flat

Slot 3:
1/2 19" (482 mm) 1 U for wireless receiver
Sensitivity: Adjustable
Sound Presets: Speech, Vocal, Flat
Analog Inputs Combo XLR/TRS Auxiliary Input:
Input Voltage Range XLR: -22 dBu, -2 dBu
Input Voltage Range XLR with 20 dB Switch: -34 dBu nominal, -14 dBu
Input Voltage Range TRS: 4 dBu maximum, -7.5 dBu nominal

Stereo RCA Auxiliary Input:
Input Voltage: 14 dBu maximum, 2 dBu nominal

XLR-3F Link In:
Input Voltage Range: 16 dBu maximum, 4 dBu nominal
Analog Output XLR-3M Link Output:
Output Voltage Level: 16 dBu maximum, 4 dBu nominal
Bluetooth A2DP with ATPX for audio streaming
USB 1x USB 2.0 port
Supports MP3, WAV, AAC, FLAC files
Media Recorder: WAV
LAN Interface
WLAN WLAN connectivity to WLAN access point
Remote Control App for iPad controls up to 20 LSP 500 PRO
IEEE 802.11b/g
Design 2-way, closed box
Drivers 1x 8" (203 mm) woofer
1x 0.75" (19 mm) compression driver, passive crossover
SPL 110 dB SPL (10 % THD, full space)
Frequency Response 65 Hz to 18 kHz (-10 dB)
Dispersion H x V: 80° x 60° (-6 dB)
Power Supply
Mains 90 to 240 V AC, 50-60 Hz
Battery 2x Lithium Ion 14.4 V?/ 4.4 Ah
Operating Time 8 hours, approximate
Charging Time 2.5 hours per battery, approximate
Operating Temperature 32 to 122°F (0 to 50°C)
Output Power Class D Amplifier, 55 W continuous, 120 W peak
Housing Coated plywood
Stand Type 1.42" (36 mm) diameter receptacle
Dimensions (W x D x H) 11.42 x 21.65 x 12.60" (290 x 550 x 320 mm)
Weight 30 lb (13.6 kg), approximate (without wireless receivers)

Related Items