The Sennheiser MKH 50 Microphone is a high quality, professional condenser microphone specifically designed for spot capturing in recording and sound reinforcement applications. The MKH 50 offers exceptional attenuation at the lateral sections of the capsule, for a focused pick up without off-axis noise. Its wide frequency response and high sensitivity result in pristine audio fidelity, no matter the source. It also has a low-frequency roll-off switch to minimize rumble/noise, and a pre-attenuation switch in case you'll mount the microphone near to high transients. The MKH 50 use +48V Phantom Power, and is more than suitable for capturing vocals or instruments in recording or sound reinforcement.
|Frequency Response||40Hz to 20kHz|
|Dynamic Range (Typical)||Not Specified by Manufacturer|
|Signal-to-Noise Ratio||12 (18) dB|
|Maximum Input Sound Level||SPL 134 (142) dB at 1 kHz|
|Power Requirements||48 V Phantom Power +/- 4V|
|Output Impedance||Nominal: 150 ohms
Min. terminating: 1000 ohms
|Output Connectors||3-pin XLR male|
|Low Frequency Roll-Off||Yes|
|Dimensions||6.02 x .98" (153 x 25mm) Length x Diameter|
|Weight||3.52 oz (100g)|
The Semheiser ME4 is a cardiod, sub-miniature clip on lavalier microphone for use with the EW wireless...
Cable for audio devices 3.5 mm lockable jack - 3.5mm rightangled jack (52 cm)
The CL2 is an input cable that will allow you to connect self powered microphones,...
Subscribe to our newsletter and always be the first to hear about what is happening.
|Melbourne||(03) 9672 2222|
|Sydney||(02) 8004 7945|
|Brisbane||(07) 3103 1429|
|Perth||(08) 6102 6382|
|Adelaide||(08) 7200 3773|
|Darwin||(08) 8911 1262|
|Canberra||(02) 6176 0125|
|Hobart||(03) 6107 9442|
|Auckland||(09) 887 0479|
© 2017 michaels camera video digital.