Record high-quality audio for high-definition video straight to your camera
X-Y stereo microphone for DSLR cameras:
Includes: Noise Isolation Arm, Floating Support Structure & Furry Windscreen
High-performance X-Y stereo condenser mics
The directional condenser microphones equipped on the TM-2X are the same mics used in our highly-regarded DR-series recorders. The X-Y pattern and two mic capsules are ideal for capturing a true representation of the sonic atmosphere, whether it's sound from a wide area or directly in front of the camera. As a result, the TM-2X records pristine sound that fits naturally with the recorded video.
Delivers high audio quality and the capacity to handle high sound pressures
We have consistently utilized our expertise in developing recording devices that focus on the design of the analog circuits behind the mic capsules. As a result, the TM-2X achieves a high performance rating and a frequency response of 50 Hz to 20 kHz. Furthermore, we designed the TM-2X with the capacity to handle high sound pressures up to 120 dB SPL to prevent distortion even in loud scenarios.
Built-in stereo mini plug output can be connected directly to the camera mic input for simple setup
Setup is as simple as connecting the cord from the TM-2X to the camera's mic input jack allowing you to add high-quality audio to video. The output can be set to one of two levels to enable compatibility with a variety of cameras.
Floating structure reduces handling noise
The floating support structure underneath the mics absorbs unwanted handling noise and sounds from cameras' mechanics.
Noise isolation arm to reduce lens operation noise included
When capturing video using changeable auto-focus lenses, the sounds produced from the lens itself can disrupt and interfere with recordings. In situations where this noise is a problem, you can reduce the interruptions by using the included noise isolation arm. The noise isolation arm physically increases the distance from the noise source to reduce its capture. The structure of the arm, including its length and height, was developed through extensive testing.
On-board Low-cut filter eliminates unwanted low frequencies
The unit includes an on-board low-cut filter to cut out low-frequency background noise. Depending on the video recording scenario, you can choose to turn this feature on or off (LOW CUT/FLAT).
Furry windscreen to reduce wind noise
When filming outdoors, even a slight breeze can enter the mic and cause wind noise. This unit comes with a furry windscreen that can physically prevent this noise from occurring. Wind noise can be reduced by simply covering the mic unit with this windscreen.
Sample sound source
With Furry windscreen Play
With no Furry windscreen
Directional stereo condenser microphone in an X-Y configuration
Designed with the capacity to easily handle high sound pressures up to 120 dB SPL
Floating support structure used to reduce handling noise
Included noise isolation arm to reduce lens operation noise
Low-cut filter to eliminate any unwanted low frequencies
Included furry windscreen
Two-stage output level adjustment switch ensures compatibility with a variety of cameras
Vari-angle microphone structure allows 180º rotation for optimal mic placement
Included shoe adapter (ISO/JIS specification compliant) can be attached to the camera accessory shoe
Tripod mounting threads enable the unit to be attached to a camera tripod
33cm connection cord supports connections in a variety of manners
Lightweight design (75 g) that won't interrupt camera balance or handling
Stereo mini-plug output jack
Operates on plug-in power from the connected unit
Microphone type cardioid
Frequency range 50Hz to 20kHz
Input output ratings
Maximum input level 120dB SPL (at 1kHz, SENS:H, LCF=Flat, RL:2.2kΩ, Vcc:2.5V)
Output impedance 1.6k ohms (RL:2.2kΩ, Vcc:2.5V)
S/N ratio 74dB (at 1kHz, 1Pa, A weighted)
Mic sensitivity switch SENS H:-37dB, SENS L:-52dB
(at 1kHz, 0dB=1V/Pa, RL:2.2kΩ, Vcc:2.5V)
Cable length 33cm
Plug 3.5 mm (1/8'") TRS stereo mini plug
(Tip: left channel, Ring: right channel, Sleeve: GND)
Power Plug-in power (JEITA standard CP-1203A)
TM-2X main unit 57(W)×59(H)×69(D)mm(not including cable and connectors)
Noise isolation arm 34(W)×57(H)×142(D)mm
TM-2X main unit 75g
Noise isolation arm 41g
Operating temerature -5 to 45?C
23 to 142?F
Accessories - Fur windscreen, noise isolation arm, Owner's Manual, warranty
The adjustable mics, four-track recording and extended battery life of the TASCAM DR-40 give...
Attenuator cable for optimum audio connection to cameraThe DR-series recorders have a higher signal...
TASCAM’s DR-05 brings high-quality stereo recording to an easy-to-use portable powerhouse with a size...
Subscribe to our newsletter and always be the first to hear about what is happening.
|Melbourne||(03) 9672 2222|
|Sydney||(02) 8004 7945|
|Brisbane||(07) 3103 1429|
|Perth||(08) 6102 6382|
|Adelaide||(08) 7200 3773|
|Darwin||(08) 8911 1262|
|Canberra||(02) 6176 0125|
|Hobart||(03) 6107 9442|
|Auckland||(09) 887 0479|
© 2017 michaels camera video digital.